Home / Rivo A & B Epoxy (Formerly Rivo 15)

Rivo A & B Epoxy (Formerly Rivo 15)

Name: Rivo A & B Epoxy (Formerly Rivo 15)
Price: 29.16 USD
Availability: InStock

Quantity

ADD TO CART

BUY IT NOW

Detail

Tenax Rivo 2 Part Epoxy or marble, granite, and stone

Fixtiop, Eliox, Domo, Micto are other Tenax 2-part epoxies.

Tenax Rivo A & B is a two-part knife grade epoxy designed for all types of stone. Rivo is one of the strongest epoxies in the stone industry. It will bond to almost any surface. Tenax Rivo is designed for permanent application. The stone will break before the bond will. Suitable for temperatures below 32 as well as extreme heat. Recommended for both interior and exterior applications. Material must be dry before application. Straw in color. VOC Compliant.

Instructions for use

Make sure surface to be treated is completely dry and clean. Keep the glue and hardeners in their original cans. If using an automatic dosing pump avoid contact with metals made of copper, brass or similar metals which may rust. Avoid use of PVC plastic. Use only plastic that is corrosive resistant. Measure out, in either weight or volume, the correct amounts of part A and part B. Mix well using clean tools. Best when applied in a thin layer. Use acetone or butyl acetate to clean tools.

Shelf Life

Keep the containers closed after use. Keep away from heat, humidity and sun light. This product will last 2 years under normal conditions between 65 and 77 .

Safety

Please read the safety data sheet before use and follow the product instructions.

Specs

Tacky free time at 77o: 90 min
Minimum reaction temperature: 50o
Temp range for use after hardening: -13o to 143o
Ratio of glue to hardener: 1:1 mix ratio

Technical Data
Viscosity Part A cps 25 C	Tixotropic paste
Viscosity Part B cps 25 C	Tixotropic paste
Density Part A / Part B at 25 C gr/cm ³	1.4 / 1.4
Aspect Part A / Aspect Part B	Straw Paste / Straw Paste
Aspect Resin Hard	Straw
GARDNER color of the resin ASTM D1544	NA
GARDNER color of the hardener ASTM D1544	NA
Mixing ratio resin + hardener in weight	100 + 100 = Total 200
Gel time in bulk at 25 C (100 gr resin + hardener)	Approximately 15-20 minutes
Tacky free in thin layer at 25 C; 50% relative humidity	Approximately 2 hours
Tacky free in thin layer at 40 C; 10% relative humidity	Approximately 1 hour 30 minutes
Hardness in Shore D (1) ASTM D 2240	78
Glass transition temperature Tglass (ASTM E1545) (1)	60 C
Peeling test with glass fiber on marble (ASTM D3167) (1)	0,5 N/mm
Adhesion force on marble (ASTM D4541)(1)	10 Mpa
Adhesion force on glass (ASTM D4541)(1)	9 Mpa
Weathering test on climatic chamber Qsun, (ASTM D904), 3 years of outdoor condition, light+rain+ thermal shock	N.A.
Yellowing test on the Xenon chamber 3 years (ISO11341)	High
Minimum reaction temperature	+10 C
Minimum temperature of use after hardening	-25 C
Maximum temperature of use after hardening	+60 C
Working time at 25 C (time for polishing or cutting)	24 hours