MB ZERO+ Marble Polishing Powder

Achieve a Brilliant Shine C With Zero Oxalic Acid

MB ZERO+ is a high-performance marble polishing powder that delivers superior clarity and shine while being less aggressive than traditional powders. Specially formulated for calcite-based stones, it excels on sensitive or hard-to-polish surfaces like white, black, and brown marbles as well as serpentines.

With a fine talc-like consistency, MB ZERO+ creates a tremendously high gloss finish without the use of oxalic acid.

Coverage:

• Countertops: ~125-200 sq. ft. per pound
• Floors: ~10-12 sq. ft. per 2 oz

Directions for Use:

Preparation:
Mask off surrounding surfaces to prevent splatters.
Wear safety glasses and gloves.
Ensure the surface is free of coatings, waxes, sealers, grease, or soil.
Hone the surface if needed using quality diamonds to maximize clarity.

Polishing Process:

1. Apply MB ZERO+ Powder

   • Counters: Use 1 tsp per 2-3 sq. ft.
   • Floors: Use 2 oz per 10-12 sq. ft.
   • Add just enough water to form a thick, non-splattering paste.

2. Polish the Surface

   • Counters: Spread the paste with a low-speed machine and hog s hair or white pad. Apply light, even pressure, polishing 1 min per sq. ft.
   • Floors: Add 5 seconds of water, then run the machine over the area for 3-4 minutes.

3. Check Results & Repeat if Needed

   • For extra luster, polish for an additional minute.
   • On counters, try a wet-to-dry polishing technique for enhanced shine.

Pro Tip:

For tight spaces, edges, and around fixtures, use a white pad cut inch larger than the pad driver for added protection.

Experience effortless polishing and long-lasting shine with MB ZERO+!